Safe Chemicals - Safety Solve Sample Label

Concrete Cleaning

Removes even stubborn stains from concrete

Safe for use with all floor sealers

Great for power floor scrubbers

Biodegradable
Non-Flamable
Concentrated
Safe for all Painted Surfaces
Excellent for cold or hot parts washers
Ultra sonic equipment
Built in antioxidant action

Equipment Parts Degreasing

Directions:

HAND APPLICATION: Dilute with water 1 to 2 ounces per gallon and rinse.

PARTS WASHERS: Dilute with water 2 to 3 ounces per gallon and adjust to cleaning job.

FOR PRESSURE WASHERS AND STEAM CLEANERS:
Dilute 1 ounce of Safety Solve per gallon and feed directly into pressure washer/steam cleaner. Rinse with water after application.

HAND APPLICATION: Requires 16 to 32 ounces (2 to 4 cups) of Safety Solve per 5 gallons of water. Difficult soils may require a stronger solution. Swab onto surface and allow to penetrate for 5 to 10 min. Rinse with water.

FOR PRESSURE WASHERS AND STEAM CLEANERS: Dilute 1 to 2 ounces of Safety Solve per gallon of water and feed directly into pressure washer. Rinse with water after vehicles are clean.

CAUTION: KEEP OUT OF REACH OF CHILDREN

INDUSTRIAL USE ONLY

MSDS SHEET ENCLOSED IN PAIL

Directions:

LIGHT CONCRETE CLEAING - FLOOR SCRUBBERS: Requires 2 to 4 cups of powder per 5 gallons of water. Difficult soils may require stronger solution. Swab onto surface and allow to penetrate for 5 to 10 min., scrubbing with bristled broom. Rinse thoroughly with clean water. Use this detergent with care on finishes that are not detergent resilient and may be reoved by this cleaner.

For heavy grime and severe oil staining, wet floor with clean water, then sprinkle the detergent powder directly onto soiled areas. Scrub with stiff broom, alld allow to penetrate until deposits are loosened. Rinse floor with clean water.